10.2" display from Pervasive Displays (model EZ102CT011)

[edundias]

Hi,

I'm trying to use a 10.2" display from Pervasive Displays (model EZ102CT011) with the TCM2-P102-231 board.
Is this display supported by your code? also, can ask for the electrical/pin connections diagram?
Thank you very much in advance.

[doganyazar]

I only tried with 7.4 inch and unfortunately I have no access to those displays anymore so I cannot really fix it.
However, it should not be too much work to make it work with 10.2 inch displays.
I suggest you to contact https://www.mpicosys.com/ since I was told that they are gonna put some time on this library so maybe they have an official javascript library now.

[MichalKamelski]

Hi,

It's Michal from MpicoSys. We have not had the chance to lay our hands on this code. However, since the communication protocol is the same for all the panels we support, it should work straight away. Just please remember to work with EPD files for the 10.2 panel, instead of the 7.4.
Please see the documentation for more info: http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=228895

[edundias]

Hi,

Where can we download the EPD files for the 10.2 panel?
Thank you.

Best Regards

Eduardo Dias
Research Engineer
Research & Technology

M_:_ +44 (0) 7341 075976 (new)
Mobex: 871 35976
E: edias@jaguarlandrover.com

Jaguar Land Rover, IDL, University of Warwick, Coventry, CV4 7AL (Internal:
W/11/1)
jaguar.com | landrover.com

The contents of this message and any attachments thereto are confidential;
no communication of such contents should be made to any person other than
the intended recipient without the prior approval of the sender. In the
event that you are not the intended recipient or an employee of the
intended recipient, please contact the sender immediately.

On 19 May 2016 at 07:20, MichalKamelski notifications@github.com wrote:

Hi,

It's Michal from MpicoSys. We have not had the chance to lay our hands on
this code. However, since the communication protocol is the same for all
the panels we support, it should work straight away. Just please remember
to work with EPD files for the 10.2 panel, instead of the 7.4.
Please see the documentation for more info:
http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=228895

—
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub
#1 (comment)

[MichalKamelski]

Dear Eduardo,

EPD file is a bitmap format. It is described in the TCM Developer's Guide (http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=228895; section 6 and 6.2.1)
You can download the convert app that converts conventional bitmaps (jpeg, png) to EPD: http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=209240
The output files are created in the original file's path.
Please also find example EPD files attached.

Pozdrawiam, Best regards,

Michał Kamelski
Product and Support Manager

MpicoSys Embedded Pico Systems Sp. z o.o.
Pomeranian Science and Technology Park
al. Zwycięstwa 96/98, 81-451 Gdynia, Poland MpicoSys Solutions B.V.
De Vetbergen 30
Waalre 5581 TZ, The Netherlands
T: +48 58 766 49 90 ext. 83
E: michal.kamelski@mpicosys.com
W: http://www.mpicosys.com/

From: "edundias" notifications@github.com
To: "doganyazar/node-epaper" node-epaper@noreply.github.com
Cc: "Michal Kamelski" michal.kamelski@mpicosys.com, "Comment" comment@noreply.github.com
Sent: Tuesday, 31 May, 2016 10:19:49
Subject: Re: [doganyazar/node-epaper] 10.2" display from Pervasive Displays (model EZ102CT011) (#1)

Hi,

Where can we download the EPD files for the 10.2 panel?
Thank you.

Best Regards

Eduardo Dias
Research Engineer
Research & Technology

M_:_ +44 (0) 7341 075976 (new)
Mobex: 871 35976
E: edias@jaguarlandrover.com

Jaguar Land Rover, IDL, University of Warwick, Coventry, CV4 7AL (Internal:
W/11/1)
jaguar.com | landrover.com

The contents of this message and any attachments thereto are confidential;
no communication of such contents should be made to any person other than
the intended recipient without the prior approval of the sender. In the
event that you are not the intended recipient or an employee of the
intended recipient, please contact the sender immediately.

On 19 May 2016 at 07:20, MichalKamelski notifications@github.com wrote:

Hi,

It's Michal from MpicoSys. We have not had the chance to lay our hands on
this code. However, since the communication protocol is the same for all
the panels we support, it should work straight away. Just please remember
to work with EPD files for the 10.2 panel, instead of the 7.4.
Please see the documentation for more info:
http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=228895

—
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub
#1 (comment)

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub , or mute the thread .

[MichalKamelski]

Dear Eduardo,

EPD file is a bitmap format. It is described in the TCM Developer's Guide (http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=228895; section 6 and 6.2.1)
You can download convert app that converts conventional bitmaps (jpeg, png) to EPD: http://www.pervasivedisplays.com/LiteratureRetrieve.aspx?ID=209240
The output files are created in the original file's path.
Please also find example EPD files attached.

PDI102_Converted.zip