Midi keyboards

[AlfredR1]

One Midi keyboard (E-Keys49 from Evolution) sends VID 0A4D, PID 0099 and receives all keystroke date via USB correctly.
Second Midi keyboard (Oxygen49 from M-Audio) sends VID 0763, PID 3102. But no keystrokes or other Midi data are received.

I use Mini USB Shield 2.0 with MAX 3421E on ESP32 controller.
Any idea or workaround?

[YuuichiAkagawa]

Pleae run USB_MIDI_desc and report the results.

I had a power issue with the my M-Audio Keystation 49 MK3. Is the power supply enough?
YuuichiAkagawa/USBH_MIDI#73

[AlfredR1]

That is whaz I receive: ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 Start 01

…

-- String Descriptors: Manufacturer: M-Audio Product: Oxygen 49 Device descriptor: Descriptor Length: 12 Descriptor type: 01 USB version: 0110 Device class: 00 Device Subclass: 00 Device Protocol: 00 Max.packet size: 08 Vendor ID: 0763 Product ID: 3102 Revision ID: 0110 Mfg.string index: 01 Prod.string index: 02 Serial number index: 00 Number of conf.: 01 Configuration descriptor: Total length: 0065 Num.intf: 02 Conf.value: 01 Conf.string: 00 Attr.: 80 Max.pwr: 32 Interface descriptor: Intf.number: 00 Alt.: 00 Endpoints: 00 Intf. Class: 01 Intf. Subclass: 01 Intf. Protocol: 00 Intf.string: 00 <<<AUDIO_CONTROL>>> Unknown descriptor: Length: 09 Type: 24 Contents: 01000109000101 Interface descriptor: Intf.number: 01 Alt.: 00 Endpoints: 02 Intf. Class: 01 Intf. Subclass: 03 Intf. Protocol: 00 Intf.string: 00 <<<MIDIStreaming>>> MS Interface descriptor 07240100014100 DescriptorSubtype: 01 USB_DESCRIPTOR_CS_INTERFACE : MS_HEADER MIDIStreaming SubClass Specification Release number: 0100 wTotalLength: 0041 MS Interface descriptor 062402010103 DescriptorSubtype: 02 USB_DESCRIPTOR_CS_INTERFACE : MIDI_IN_JACK(Embedded) JackType: 01 JackID: 01 MS Interface descriptor 062402020200 DescriptorSubtype: 02 USB_DESCRIPTOR_CS_INTERFACE : MIDI_IN_JACK(External) JackType: 02 JackID: 02 MS Interface descriptor 092403010901020103 DescriptorSubtype: 03 USB_DESCRIPTOR_CS_INTERFACE : MIDI_OUT_JACK(Embedded) JackType: 01 JackID: 09 NrInputPins: 01 020103 MS Interface descriptor 092403020A01010100 DescriptorSubtype: 03 USB_DESCRIPTOR_CS_INTERFACE : MIDI_OUT_JACK(External) JackType: 02 JackID: 0A NrInputPins: 01 010100 Endpoint descriptor: Endpoint address: 81 Attr.: 02(Bulk) Max.pkt size: 0040 Polling interval: 00 MS Endpoint descriptor 0525010109 USB_DESCRIPTOR_CS_ENDPOINT : MS_GENERAL bNumEmbMIDIJack: 01 09 Endpoint descriptor: Endpoint address: 02 Attr.: 02(Bulk) Max.pkt size: 0040 Polling interval: 00 MS Endpoint descriptor 0525010101 USB_DESCRIPTOR_CS_ENDPOINT : MS_GENERAL bNumEmbMIDIJack: 01 01 Addr:1(0.0.1) Can you see what is wrong? Alfred Von: Yuuichi Akagawa ***@***.***> Gesendet: Dienstag, 30. Januar 2024 11:59 An: felis/USB_Host_Shield_2.0 ***@***.***> Cc: AlfredR1 ***@***.***>; Author ***@***.***> Betreff: Re: [felis/USB_Host_Shield_2.0] Midi keyboards (Issue #803) Pleae run USB_MIDI_desc <https://github.com/YuuichiAkagawa/USBH_MIDI/blob/master/examples/USB_MIDI_desc/USB_MIDI_desc.ino> and report the results. I had a power issue with the my M-Audio Keystation 49 MK3. Is the power supply enough? YuuichiAkagawa/USBH_MIDI#73 <YuuichiAkagawa/USBH_MIDI#73> — Reply to this email directly, view it on GitHub <#803 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB5FNK3WGQ6Q2L76MXXP2K3YRDG75AVCNFSM6AAAAABCP6YKTCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJWGU4TENBXGE> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AB5FNK7RDMBMGJUH243S3O3YRDG75A5CNFSM6AAAAABCP6YKTCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTSHTQVO.gif> Message ID: ***@***.*** ***@***.***> >

[YuuichiAkagawa]

There are no problems with the descriptor.
Does the USBH_MIDI_dump also not work?

[AlfredR1]

Thanks for your attention and support Midi dump shows VID/PID only with M-Audio, even with keystrokes oder slider-movements:: rst:0x1 (POWERON_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 VID:0763, PID:3102 But a lot of data with E-Key49: rst:0x1 (POWERON_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 VID:0A4D, PID:0090 00000FD9: 4: 09 90 2D 13 00 00 0D 80 00 53 FC 3F 74 1C FC 3F ED A4 03 45 B0 5C FB 3F 00 00 00 00 00 00 00 00 01 00 00 00 38 1D FC 3F 00 52 FC 3F 03 00 00 00 23 00 06 00 2C 44 0D 80 20 53 FC 3F 00 00 00 00 00001061: 4: 09 90 2B 30 00 00 0D 80 00 53 FC 3F 74 1C FC 3F ED A4 03 45 B0 5C FB 3F 00 00 00 00 00 00 00 00 01 00 00 00 38 1D FC 3F 00 52 FC 3F 03 00 00 00 23 00 06 00 2C 44 0D 80 20 53 FC 3F 00 00 00 00 00001072: 4: 09 90 2D 00 00 00 0D 80 00 53 FC 3F 74 1C FC 3F ED A4 03 45 B0 5C FB 3F 00 00 00 00 00 00 00 00 01 00 00 00 38 1D FC 3F 00 52 FC 3F 03 00 00 00 The supply on M-Audio seems ok, because all changes on setup and CC show correct reactions in the display I am puzzeled Alfred

[YuuichiAkagawa]

The Keystation 49 MK3 does not lack power supply to the keyboard.
The operation is abnormal because a situation of insufficient power supply to the microcontroller occurs when the keyboard starts up, causing it to reset.
If the ESP32 is reset after the keyboard is connected and the display is completed, does it work?

[AlfredR1]

No sorry, it does not

[AlfredR1]

May I have some additional information: 1. I use the USBMiniShield with some modifications in order to supply it with 3V3 and USB with 5V I cutted one connection on the PCD (see picture 1). Now I can feed 5V on Kathode or Anode of the Schottly Diode 2. Maybe the Reset (R 1k) from 5V to RST is not sufficient? 3. INT output is now not supplied with 3V3 via 22k. But I do not connect INT signal to ESP32. Is it required? (Instead of ESP32 WROOM I use an AudioKit A1S and USB Mini Shield only) But first I like to wish a good night to Tokyo from Germany Alfred

[YuuichiAkagawa]

There seems to be no problem with the connection to USBHost Shield as it is working with E-Keys49.
I checked to see if there is sufficient power supply to isolate the problem. For example, if the power supply is more than 1A, I consider it is not a problem.
Since VID and PID are output when USBH_MIDI_dump is executed, the device is recognized as a MIDI device.

In previous cases, the following two factors have caused the failure to operate.

• Insufficient power (issue)
• Toggle issue (Fix some bugs #438)

[AlfredR1]

Thanks a lot for your support. Now I know that it is no software issue.
I will try to improve 5V supply and to stabilize it. This will take some time. If I will succeed I will leave a note here!

Best Regards